| |
 http://www.mbo-osswald.de
|
Company profile
mbo Osswald GmbH since 1967 produces linking elements and joint combinations of any type. The most modern manufacturing methods and well qualified employees ensure that the highest quality requirements can be satisfied.
|
|
|
Products:
The knuckle eyes can be used as standard linking on the connecting rods of pneumatic cylinders or gas springs....
|
|
|
|
There are such families of parts available in the retainer category which are elementary : for shafts with groove, compensated for play / demountable and also for smooth shafts, demountable or simply not.
|
|
|
|
Fork heads are an economic alternative to other highly priced linking elements. These parts are available in the sizes ranging from M 6 to M 20 with left or right hand fine or coarse threads.
|
|
|
|
|
|
|
mbo offers a clevis with a hardened cross hole. A specially developed hardening procedure increases the service life of the product several times.
|
|
|
|
|
|
|
Axial angle joints are available in the popular angle joint standard sizes in either galvanized or stainless steel.
|
|
|
|
|
|
|
Also called ball joints or Faudi joints, are available from M 5 to M 16 in steel or stainless steel in line with DIN 71801 to DIN 71805.
|
|
|
|
|
|
|
Screw threads in the sizes of M 4 to M 20 with left or right hand fine or coarse threads can be supplied.
|
|
|
|
|
|
|
Standardized DIN parts are available in practically all sizes from DIN 1433 to DIN 1445 and from DIN EN 22338 to DIN EN 22341. In diameters from 4 mm to 100 mm and in lengths from 20 mm to 200 mm.
|
|
|
|
|
|
|
The stud bolts are available in standard or stainless-steel versions with diameters from 8mm to 20mm.
|
|
|
|
|
|
|
Rod ends in line with DIN ISO 12240-4 (formerly DIN 649) and also pivot bearings in line with DIN ISO 12240-1 (formerly DIN 648).
|
|
|
|
|
|
|
|
|